S 400 is intended for waterproof two-component flexible cement-based waterproofing coating systems. S 400 is recommended for all kind of New & Old Structures. S 400 has excellent bridging and elastomeric properties.
S 400 is mixed with cement & water in the ratio of i.e 1 part S 400: 2 to 2.5 parts cement (OPC) : 500 ml (Maximum) to form homogeneous mixture for water proofing of any structure with 2 to 4 coats depending on the requirements. Non woven (80-120gsm) and fiber mesh (45gsm) is recommended reinforcement for the system (Medium speed mechanical mixing)
For Sealant Application 1 part S 400: 3 to 4 parts Talc – Caco3
Note: SBR 623 Primer is Recommended for all Waterproofing systems
| Solids content % (ISO 1625, DIN 53189) : | 57 ± 1 |
| Viscosity at 23 °C mPa· s (EN ISO 3219, rate of shear 250 s-1) : | 140 – 200 |
| pH (ISO 1148, DIN 53785) : | 7.0 – 8.5 |
| Density (ISO 8962) at 20°C g/cm3 : | ca. 1.04 |
| Average particle size μm : | ca. 0.2 |
| Minimum film-forming temperature °C (ISO 2115, DIN 53787) : | < 1 |
| Resistance to frost : | Not resistant |
| Density (ISO 1183, DIN 53479) g/cm3 at 20°C : | ca. 1.08 |
| Glass transition temperature Tg (DSC) °C : | ca. – 6 |
| Ultimate elongation* % : | > 1600 |
| Tensile stress at break N/mm2 : | ca. 0.3 |
| Surface : | Tacky |
| Water absorption after immersion for 24 hours (ISO 62, DIN 53495) % : | 5 –10 |
| Appearance : | Clear, transparent |
| Resistance to ageing : | Good |
| Stability to light : | Good |
116-C, 1st, 2nd Floor, Shahpur Jat, Behind UCO Bank, New Delhi-110049 India
Ph: (011) 26494793
Mob : 9311121361, 9310242006, 9310242012
info@armainfra.com
Tower B - 607, Logix Technova, Sector – 132, Noida Expressway, 201303
Ph: (011) 26494793
Mob : 9311121361, 9310242006, 9310242012
info@armainfra.com
©2023. Arma Infra Pvt. Ltd.. All Rights Reserved.
Powered By : Growthhackers Digital Media Pvt. Ltd.